Standard Auxiliary Fans
0.75KW
- 305mm diameter mild steel casting
- 0.75kW – 475 – 575 volt – 2 pole
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel diffuser
- Screen on intake side
- Three mild steel Flanges
- Air movement, and impeller direction
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into a ‘’Silenced Fan’’ whereby the silencers are built into the casing of the actual fan
- Fan can be made into ‘’Silenced Fan’’ – whereby the silenced are built into the casing of the actual fan
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement -typically used for fornt-end development
- Fan can be fitted with 305mm diameter Fan Silencers
Item Specifications
- Casing thickness: 6mm
- Casing length: 520mm
- Unit weight: 40kg
- 2980 R.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 0.6 Amps
- Absorbed power: 0.45kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Seven impeller blades
- Four diffuser blades – 3mm
- 10mm flange thickness – width: 40mm
- 4 flange holes – 356 P.C.D
- Fan Number positioning: either single spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Paint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 0
- Terminal Block: D90
4.0KW
- 406mm diameter mild steel casting
- 4.0kW – 475 575 volt – 2 pole
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel diffuser
- Screen on intake side
- Three mild steel Flanges
- Air movement, and impeller direction
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into a ‘’Silenced Fan’’ whereby the silencers are built into the casing of the actual fan
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement – typically used for front-end development
- Fan can be fitted with 406mm diameter Fan Silencers
Item Specifications
- Casing thickness: 6mm
- Casing length: 750mm
- Unit weight: 120kg
- 2980 R.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 9.5 amps
- Absorbed power: 2.2kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Eight impeller blades
- Eleven diffuser blades – 3mm thick
- 10mm flange thickness – width: 50mm
- 6 flange holes – 457 P.C.D
- Fan Number positioning: either single spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Pint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 1
- Terminal Block: D90
7.5KW
- 406mm diameter mild steel casting
- 4.0kW – 475 575 volt – 2 pole
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel diffuser
- Screen on intake side
- Three mild steel Flanges
- Air movement, and impeller direction
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into a ‘’Silenced Fan’’ whereby the silencers are built into the casing of the actual fan
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement – typically used for front-end development
- Fan can be fitted with 570mm diameter Fan Silencers
Item Specifications
- Casing thickness: 6mm
- Casing length: 900mm
- Unit weight: 320kg
- 2980 R.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 15.5 Amps
- Absorbed power: 5.5kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Eight impeller blades
- Eleven diffuser blades – 3mm thick
- 12mm flange thickness – width: 50mm
- 9 flange holes – 622 P.C.D
- Fan Number positioning: either single spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Pint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 1
- Terminal Block: D90
11.0KW
- 570mm diameter mild steel casting
- 11.0kW – 475 575 volt – 2 pole
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel diffuser
- Screen on intake side
- Three mild steel Flanges
- Air movement, and impeller direction
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into a ‘’Silenced Fan’’ whereby the silencers are built into the casing of the actual fan
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement – typically used for front-end development
- Fan can be fitted with 570mm diameter Fan Silencers
Item Specifications
- Casing thickness: 6mm
- Casing length: 900mm
- Unit weight: 350kg
- 2980 R.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 17.5 Amps
- Absorbed power: 7.5kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Thirteen impeller blades
- Eleven diffuser blades – 3mm thick
- 12mm flange thickness – width: 50mm
- 9 flange holes – 622 P.C.D
- Fan Number positioning: either single spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Pint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 2
- Terminal Block: D90
15.oKW
- 570mm diameter mild steel casting
- 15.0kW – 475 – 575 volt – 2 pole
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel diffuser
- Screen on intake side
- Three mild steel Flanges
- Air movement, and impeller direction
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into a ‘’Silenced Fan’’ whereby the silencers are built into the casing of the actual fan
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement – typically used for front-end development
- Fan can be fitted with 570mm diameter Fan Silencers
Item Specifications
- Casing thickness: 6mm
- Casing length: 900mm
- Unit weight: 400kg
- 2980 R.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 24.5 amps
- Absorbed power: 9.5kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Sixteen impeller blades
- Eleven diffuser blades – 3mm thick
- 12mm flange thickness – width: 50mm
- 9 flange holes – 622 P.C.D
- Fan Number positioning: either single spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Pint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 2
- Terminal Block: D90
18.6KW
- 570mm or 760mm diameter mild steel casting
- 18.6kW – 475 – 575 volt – 2 pole
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel diffuser
- Screen on intake side
- Three mild steel Flanges
- Air movement, and impeller direction
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into a ‘’Silenced Fan’’ whereby the silencers are built into the casing of the actual fan
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement – typically used for front-end development
- Fan can be fitted with 760mm diameter Fan Silencers
Item Specifications
- Casing thickness: 6mm
- Casing length: 1000mm
- Unit weight: 435kg
- 2980 R.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 31.5 amps
- Absorbed power: 12.0kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Five impeller blades
- Eleven or Four diffuser blades – 3mm thick
- 12mm flange thickness – width: 50mm
- 9 flange holes – 622 P.C.D
- 12 flange holes – 812 P.C.D
- Fan Number positioning: either single spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Pint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 2
- Terminal Block: D90
22.0KW
- 760mm diameter mild steel casting
- 22.0kW – 475 – 575 volt – 2 pole
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel diffuser
- Screen on intake side
- Three mild steel Flanges
- Air movement, and impeller direction
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into a ‘’Silenced Fan’’ whereby the silencers are built into the casing of the actual fan
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement – typically used for front-end development
- Fan can be fitted with 760mm diameter Fan Silencers
Item Specifications
- Casing thickness: 6mm
- Casing length: 1000mm
- Unit weight: 485kg
- 2980 R.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 38.5 amps
- Absorbed power: 15.5kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Five impeller blades
- Four diffuser blades – 3mm thick
- 12mm flange thickness – width: 50mm
- 12 flange holes – 812 P.C.D
- Fan Number positioning: either single spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Pint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 2
- Terminal Block: D160
45.0KW
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel diffuser
- Screen on intake side
- Three mild steel Flanges
- Air movement, and impeller direction
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into a ‘’Silenced Fan’’ whereby the silencers are built into the casing of the actual fan
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement – typically used for front-end development
- Fan can be fitted with 760mm diameter Fan Silencers
Item Specifications
- Casing thickness: 6mm
- Casing length: 1000mm
- Unit weight: 640kg
- 2980 R.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 60.5 amps
- Absorbed power: 31.5kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Five impeller blades
- Four diffuser blades – 3mm thick
- 12mm flange thickness – width: 50mm
- 12 flange holes – 808 P.C.D
- Fan Number positioning: either single spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Pint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 2
- Terminal Block: D160
75.0KW
- 1016mm diameter mild steel casting
- 75.0kW – 475 – 575 volt – 2 pole Padmount Motor (also available in 4 pole)
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel diffuser
- Screen on intake side
- Three mild steel Flanges
- Air movement, and impeller direction
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into a ‘’Silenced Fan’’ whereby the silencers are built into the casing of the actual fan
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement – typically used for front-end development
- Fan can be fitted with 1016mm diameter Fan Silencers
Item Specifications
- Casing thickness: 6mm
- Casing length: 1200mm
- Unit weight: 750kg
- 2980 R.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 110.0 Amps
- Absorbed power: 54.0kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Six or Ten impeller blades
- Eight or Nine diffuser blades
- 12mm flange thickness – width: 70mm
- 15 flange holes – 1067 P.C.D
- Fan Number positioning: either single spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Pint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 3
- Terminal Block: D225
Specialized sizes 90KW to 200KW
Sound attenuated Fans
4.0KW
- 406mm diameter inner mild steel perforated plate casing
- 590mm diameter outer mild steel casing
- 4.0KW – 475 – 575 volt – 2 pole Padmount Motor
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel perforated plate diffuser
- Screen on intake side
- Two mild steel Flanges
- Air movement, and impeller direction arrows
- Stiffening Bars
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement -typically used for fornt-end development
Item Specifications
- Casing thickness: 5mm
- Casing length: 1000mm
- Unit weight: 180kg
- 2980 A.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 9.5 Amps
- Absorbed power: 2.2kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Eighteen impeller blades
- Thirteen diffuser blades
- 10mm flange thickness – width: 50mm
- 6 flange holes – 457 P.C.D
- Fan Number positioning: either single spot, or two spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Paint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 0
- Terminal Block: D90
7.5KW
- 570mm diameter inner mild steel perforated plate casing
- 730mm diameter outer mild steel casing
- 7.5KW – 475 – 575 volt – 2 pole Padmount Motor
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel perforated plate diffuser
- Screen on intake side
- Two mild steel Flanges
- Air movement, and impeller direction arrows
- Stiffening Bars
- * Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement -typically used for fornt-end development
Item Specifications
- Casing thickness: 6mm
- Casing length: 1500mm
- Unit weight: 380kg
- 2980 R.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 15.5 Amps
- Absorbed power: 5.5kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Eight impeller blades
- Eleven diffuser blades
- 12mm flange thickness – width: 50mm
- 9 flange holes – 620 P.C.D
- Fan Number positioning: either single spot, or two spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Paint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 1
- Terminal Block: D90
11.0KW
- 570mm diameter inner mild steel perforated plate casing
- 730mm diameter outer mild steel casing
- 11.0KW – 475 – 575 volt – 2 pole Padmount Motor
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel perforated plate diffuser
- Screen on intake side
- Two mild steel Flanges
- Air movement, and impeller direction arrows
- Stiffening Bars
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement -typically used for fornt-end development
Item Specifications
- Casing thickness: 6mm
- Casing length: 1500mm
- Unit weight: 430kg
- 2980 A.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 17.5 Amps
- Absorbed power: 7.5kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Sixteen impeller blades
- Eleven diffuser blades
- 12mm flange thickness – width: 50mm
- 9 flange holes – 622 P.C.D
- Fan Number positioning: either single spot, or two spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Paint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 2
- Terminal Block: D90
15.0KW
- 570mm diameter inner mild steel perforated plate casing
- 730mm diameter outer mild steel casing
- 15.0KW – 475 – 575 volt – 2 pole Padmount Motor
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel perforated plate diffuser
- Screen on intake side
- Two mild steel Flanges
- Air movement, and impeller direction arrows
- Stiffening Bars
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement -typically used for fornt-end development
Item Specifications
- Casing thickness: 6mm
- Casing length: 1500mm
- Unit weight: 440kg
- 2980 A.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 24.5 Amps
- Absorbed power: 9.5kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Sixteen impeller blades
- Ten diffuser blades
- 12mm flange thickness – width: 50mm
- 8 flange holes – 620 P.C.D
- Fan Number positioning: either single spot, or two spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Paint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 2
- Terminal Block: D90
18.5KW
- 570mm diameter inner mild steel perforated plate casing
- 730mm diameter outer mild steel casing
- 18.5KW – 475 – 575 volt – 2 pole Padmount Motor
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel perforated plate diffuser
- Screen on intake side
- Two mild steel Flanges
- Air movement, and impeller direction arrows
- Stiffening Bars
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement -typically used for fornt-end development
Item Specifications
- Casing thickness: 5mm
- Casing length: 1500mm
- Unit weight: 525kg
- 2980 R.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 31.5 Amps
- Absorbed power: 12.0KW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Sixteen impeller blades
- Eleven diffuser blades
- 12mm flange thickness – width: 50mm
- 9 or 12 flange holes – 622 or 812 P.C.D
- Fan Number positioning: either single spot, or two spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Paint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 2
- Terminal Block: D160
22.0KW
- 760mm diameter inner mild steel perforated plate casing
- 950mm diameter outer mild steel casing
- 22.0KW – 475 – 575 volt – 2 pole Padmount Motor
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel perforated plate diffuser
- Screen on intake side
- Two mild steel Flanges
- Air movement, and impeller direction arrows
- Stiffening Bars
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement -typically used for fornt-end development
Item Specifications
- Casing thickness: 6mm
- Casing length: 1480mm
- Unit weight: 540kg
- 2980 A.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 38.5 Amps
- Absorbed power: 15.5kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Five impeller blades
- Ten diffuser blades
- 12mm flange thickness – width: 50mm
- 12 flange holes – 808 P.C.D
- Fan Number positioning: either single spot, or two spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Paint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 2
- Terminal Block: D160
45.0KW
- 760mm diameter inner mild steel perforated plate casing
- 950mm diameter outer mild steel casing
- 45.0KW – 475 – 575 volt – 2 pole Padmount Motor
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel perforated plate diffuser
- Screen on intake side
- Two mild steel Flanges
- Air movement, and impeller direction arrows
- Stiffening Bars
- Lifting lugs
Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement -typically used for fornt end development
Item Specifications
- Casing thickness: 6mm
- Casing length: 2180mm
- Unit weight: 820kg
- 2980 A.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 60.5 Amps
- Absorbed power: 31.5kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Five impeller blades
- Ten diffuser blades
- 12mm flange thickness – width: 50mm
- 12 flange holes – 808 P.C.D
- Fan Number positioning: either single spot, or two spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Paint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 2
- Terminal Block: D160
75.0KW
- 1016mm diameter inner mild steel perforated plate casing
- 1216mm diameter outer mild steel casing
- 75.0KW – 475 – 575 volt – 2 pole Padmount Motor
- Terminal box fitted with cable gland
- Mild steel impeller
- Mild steel perforated plate diffuser
- Screen on intake side
- Two mild steel Flanges
- Air movement, and impeller direction arrows
- Stiffening Bars
- Lifting lugs
- Options and Variations
- Fan can be fitted with intake and outlet screens
- Screens can be ordered to be galvanised
- Fan can be fitted with skids
- Fan can be made into ‘’Airjet Type’’ – providing a greater velocity of air movement -typically used for fornt end development
- Item Specifications
- Casing thickness: 6mm
- Casing length: 2180mm
- Unit weight: 960kg
- 2980 A.P.M – IP55 – Class ‘’F’’ insulation
- Locked rotor current: 110.0 Amps
- Absorbed power: 54.0kW
- Terminal box fitted on exterior of casing
- Impeller is dynamically balanced
- Six impeller blades
- Eight diffuser blades
- 12mm flange thickness – width: 50mm
- 15 flange holes – 1060 P.C.D
- Fan Number positioning: either single spot, or two spot, or two spots at 180 degrees apart
- Fan Numbering: either single welded or cut out of mild steel
- Paint Base Coat: Red Oxide Epoxy Primer
- First and Second Coat: Quick Drying Enamel
- Cable Gland: Number 3
- Terminal Block: D225
Specialized sizes 90KW to 200KW
Airjet Fans
Airjet Fans
Our airjet fan range incorporates the best 2 pole fan technology with conical inlets and venturi outlets to give a more direct range of airflow. These can be fitted with or without stand and many other optional extras in order to fit exact mining or industrial specifications.
Please enquire for more information.
Flameproof Fans
Flameproof Fans
Axial Flow Fans manufactures a wide range of flameproof fans which are approved for use in any Flameproof environment.
Please enquire for more information.
Durafans
Design Features and Solutions
The Durafan is an entirely new concept in Mining Ventilation.
The Design is unique in that the fan operating speed is half that of conventional ventilation fans. This feature provides the following benefits:
1 – Reduced operating speeds results in less damage to the bearings which account for a large percentage of failures.
2 – The slower impeller speeds result in a different noise frequency spectrum – we are no longer faced with high high-end frequency pressure levels.
Traditionally any attempt to reduce the operating speed of the fan has been at the expense of air pressure. Through our unique design of casing, impellers and sets of diffusers we have managed to maintain the volumes and pressure of the high speed fan. In fact we have improved the volume to such an extent that we are now able to use a lower rated kilowatt motor to do the work that was traditionally done by a higher kilowatt motor.
Improved Efficiency
The fact that a lower kilowatt motor can now achieve the performance of a higher powered motor together with fine tweaking the double impeller system has resulted in much greater efficiencies. The volume of air moved is now greater than that traditionally moved by a standard fan of similar size. This feature is in alignment with the thinking and strategy of the Department of Minerals and Energy. The Department has launched a program to improve energy efficiency. One of the areas that has specifically been targeted is that of electric motors
Commercial fans
Commercial Fans
A large range of commercial fans can be manufactured to suit your exact specifications and needs for any industry.
Please enquire for more information.
Fan Silencers
406MM
406 MM DIAMETER FAN SILENCER
406 mm diameter casing
1300mm long
1,6mm casing thickness
300WA Mild Steel
Flanges – 50x6
Fill – 475x50mm Energylite faced with black sonic liner and 60kg/m³ Insulboard
Expanded metal – 6318F
Silencer Weight – 55 kg
570MM
570 MM DIAMETER FAN SILENCER
570 mm diameter casing
1300mm long
1,6mm casing thickness
300WA Mild Steel
Flanges – 50x6
Fill – 475x50mm Energylite faced with black sonic liner and 60kg/m³ Insulboard
Expanded metal – 6318F
Silencer Weight – 75 kg
760MM
760 MM DIAMETER FAN SILENCER
760 mm diameter casing
1300mm long
1,6mm casing thickness
300WA Mild Steel
Flanges – 50x6
Fill – 475x50mm Energylite faced with black sonic liner and 60kg/m³ Insulboard
Expanded metal – 6318F
Silencer Weight – 95.5 kg
1016MM
1220MM
1408MM
Premium Efficiency
Premium Efficiency Range
The newly developed premium efficiency range has been produced to incorporate the newest technology available to give a robust, high performing fan that offers the best efficiency available with help from class leading aerodynamic features. This helps us achieve an overall efficiency rating of 80 % and higher.
Please enquire for more information.